Сахара

THERMO-SCREW MACHINE

The thermo-screw machine (PTVD) is designed for mixing polymers with a filler (sand) and adding a coloring pigment. PTVD is a continuous action device

Technical details

Performance

150-170 kg/hour

Diameter of the agitator shaft feed

310 mm

Rotation frequency

18 rev/min

Electric motor power

5,5 kW/hour

Power of heating elements 12 pcs x 1.0 kW

12 kW/hour

Completeness

PTVD

1pcs

Drying table with technological weights

1pcs

Mixing container

1pcs

Scales

1pcs

Reception table

1pcs

Real passport

1pcs

Dimensions

Length - 3620 mm

Width - 920 mm

Height - 1280 mm

The weight - 650 kg

Device and principle of operation

1. Frame 
2. Electric motor
3. V-belt transmission
4. Reducer.
5. Receiving hopper.
6. Cylindrical heat chamber
7. Shaft agitator
8. Dosing device.
9. Heating element
10. Thermal insulation
11. Electrical control cabinet
12. Reception table

Work of PTVD – in 30 minutes. before the start of work, heating elements are turned on to warm up the cylindrical heat chamber. At this time, polymers are mixed with filler (sand) and coloring pigment in accordance with technical specifications. After warming up the thermo camera, the electric motor is turned on, which makes the agitator-feed shaft work through a belt drive.
Then a mixture of polymer, sand and dye is poured through the receiving hopper, which is heated in a thermos camera and becomes a homogeneous mass.
Through the agitator-feed shaft, the mass is fed to the outlet, where it is cut by a cut-off device and dosed on the scales.

Our contacts